1、設有專用進口ABB渦輪風機和電機，防止電機燒壞、防過載電路設計，安全性能更高，工作穩定。

1. Equipped with a dedicated imported ABB turbine fan and motor to prevent motor burnout and overload circuit design, with higher safety performance and stable operation.

2、采用內置式中央集中PLC控制方式，集中處理系統設計施工，結構簡單，操作方便。

2. Adopting a built-in central centralized PLC control method, the centralized processing system is designed and constructed with a simple structure and convenient operation.

3、脈沖反吹式自動清灰：濾芯采用自動旋轉反吹清灰設計，使濾芯表面清灰更加干凈，確保除塵器有一個恒定的吸風量；空壓機部分為采用高壓膠管連接，從底部高壓進氣，保障凈化器始終處于良好工作狀態。（可根據用戶需求設計為自動或手動控制模式）

3. Pulse back blowing automatic cleaning: The filter adopts an automatic rotating back blowing cleaning design, making the surface of the filter cleaner and ensuring a constant suction air volume of the dust collector; The air compressor section is connected by high-pressure rubber hoses, with high-pressure air intake from the bottom to ensure that the purifier is always in good working condition. (Can be designed as automatic or manual control mode according to user needs)

4、濾筒采用美國進口材料，使用壽命更長，可以過濾0.3μm的粉塵顆粒，對濕性和粘性的粉塵處理效果更佳。濾筒采用聚四氟乙烯材料，表面熱覆了一層超細纖維膜，可以直接將粉塵阻接在濾材的表面上；濾料折褶使用，大大增大過濾面積，同時，使除塵器結構更加緊湊；

4. The filter cartridge is made of imported materials from the United States, which has a longer service life and can filter 0.3 μ m dust particles. It has a better treatment effect on wet and sticky dust. The filter cartridge is made of polytetrafluoroethylene material and coated with a layer of ultra-fine fiber membrane on the surface, which can directly block the dust onto the surface of the filter material; The use of filter material folding greatly increases the filtering area and makes the structure of the dust collector more compact;

5、由于采用360度活動萬向吸臂，可全方位、多角度吸收煙氣，提高了除煙效率，全面保證了車間環境，保障了作業人員的身心健康。

5. Due to the use of a 360 degree movable universal suction arm, it can absorb smoke from all directions and angles, improve smoke removal efficiency, comprehensively ensure the workshop environment, and ensure the physical and mental health of workers.

6、凈化器內部針對火災隱患和大顆粒熔渣采用了三道防護措施，使凈化器的壽命更長、安全更可靠。與同體積除塵器相比，焊接煙塵處理器過濾面中生代相對較大，過濾風速較小，阻力?。?/p>

6. Three protective measures have been taken inside the purifier to address fire hazards and large particle slag, ensuring a longer lifespan and greater safety and reliability. Compared with the same volume dust collector, the welding smoke and dust processor has a relatively larger filtration surface in the Mesozoic era, lower filtration wind speed, and lower resistance;

7、清潔空氣從格柵狀排風口方向均勻引導和分散，降噪音效果好。

7. Clean air is evenly guided and dispersed from the direction of the grid shaped exhaust outlet, resulting in good noise reduction effect.

8、采用專用的萬向腳輪，方便設備在車間隨意移動和定位。

8. Using dedicated universal casters, it is convenient for equipment to move and position freely in the workshop.

9、光電控制開、關機，節能省電，懸臂罩帶有照明裝置，適合低照度環境。

9. Optoelectronic control for on/off, energy-saving and power-saving. The cantilever cover is equipped with lighting devices, suitable for low light environments.

10、凈化器內耗材更換方便。

10. The replacement of consumables inside the purifier is convenient.

上一篇：機器人涂裝線的應用領域
下一篇：自動式拋丸機在日常工作中如何使用？